Home » Products » Plate Rolling Machine/Plate Bending Roll » Universal Rolling Machine

Universal Rolling Machine

Introduction

Sheets can not be physically bent perfectly with any roll bending machine, and will thus leave what is termed as the Unbent Flat. This universal rolling machine allows free adjustment of unbent flat length, and is able to roll plates into O shape, U shape, R shape or other shapes, so as to satisfy diversified demands. Located in Jiangsu province, adjoining Shanghai city, our company enjoys easy transportation and can provide more than 30 models of universal plate rolling machine.

Features of Universal Rolling Machine
1. Its upper roller is in the shape of a drum. There are carrier rollers under the bottom of lower rollers for adjustment. The machine is able to roll thin or thick plates into workpieces with high straightness.
2. Due to the unique rear plate rolling technology, this plate rolling machine realizes continuous bending and avoids permanent set as well as sharp bend, ensuring high-accuracy workpieces.
3. The top roller of the universal rolling machine generates the pressure needed for pre-bending of leading edge and trailing edge, which realizes the control over the length and shape of unbent flat.
4. Its integrated chassis contributes to the change of workplace.
5. The thickness of its processable plates range from 12 to 160mm.
6. Fitted with a man-machine interaction device, this plate bending roll has automatic compensation function during bending. It only requires one operator and comes with high efficiency and good safety.

Technical Parameters of Universal Rolling Machine

Model Maximum plate thickness Maximum pre-bending thickness Plate width Diameter of upper roller Main power
W11S-12X2000 12 10 2000 250 5.5
W11S-16X2000 16 12 2000 255 7.5
W11S-16X2500 16 12 2500 300 15
W11S-18X3000 18 14 3000 350 15
W11S-20X3000 20 16 3000 375 22
W11S-25X2500 25 20 2500 380 22
W11S-30X2500 30 25 2500 410 30
W11S-30X3000 30 25 3000 450 30
W11S-32X3000 32 28 3000 480 37
W11S-35X2500 35 30 2500 460 37
W11S-35X3000 35 30 3000 510 45
W11S-40X2500 40 35 2500 500 45
W11S-40X3000 40 35 3000 540 55
W11S-40X4000 40 32 4000 610 55
W11S-45X3000 45 40 3000 590 55
W11S-45X4000 45 40 4000 660 75
W11S-50X4000 50 45 4000 700 75
W11S-55X3000 55 45 3000 620 75
W11S-55X4000 55 50 4000 750 90
W11S-60X3000 60 50 3000 650 75
W11S-60X4000 60 55 4000 780 90
W11S-65X4000 65 60 4000 810 90
W11S-70X3000 70 60 3000 710 75
W11S-70X4000 70 65 4000 840 90
W11S-75X3000 75 65 3000 740 90
W11S-80X3000 80 70 3000 770 90
W11S-80X4000 80 75 4000 900 90
W11S-90X3000 90 80 3000 800 90
W11S-100X3000 100 90 3000 860 90
W11S-100X4000 100 85 4000 940 2X55
W11S-110X4000 110 95 4000 990 2X75
W11S-120X3000 120 100 3000 900 2X55
W11S-130X3000 130 110 3000 960 2X75
W11S-150X3000 150 120 3000 1080 2X75
W11S-160X4000 160 130 4000 1260 2X90

Due to continuous improvement on our products, in case there is any inconformity to sample data, the parameters will comply with our technical agreement without further notice.

Inquiry Form